IBM ILV200 Projector User Manual


 
4. Pull the lamp-module door up and remove it as shown.
WARNING:
Be extremely careful when removing the lamp module. In the
unlikely event that the bulb ruptures, small glass fragments might
be generated. The lamp module is designed to contain these
fragments, but use caution when removing the lamp module.
Attention: This product contains a Metal Arc Lamp which contains
Mercury. Dispose of it as required by local ordinances and regulations.
5. Loosen the two nonremovable screws on the outside of the module.
WARNING:
Never operate with the lamp door open or removed. This disrupts
the air flow and causes the projector to overheat.
Installation and users guide 1-27