Filter
Top Products
Installation and user’s guide
This section contains installation and usage information.
Introduction
The IBM
®
iLV200 and iLC200 Data/Video Projectors are specifically designed
for multipurpose use. They generate crisp, clear images using Digital Light
Processing
™
(DLP) technology and feature an M1-DA connector for easy,
built-in digital/analog and USB connectivity. They are easy to connect, easy to
use, easy to transport, and easy to maintain. The iLV200 has native SVGA 800
x 600 resolution, the iLC200 has XGA 1024x768 resolution. The user-interfaces
of the two products are identical; information in this user’s guide applies to
both products.
The projectors are compatible with these major broadcast video standards:
NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and SECAM. They
automatically adjust to optimize its performance for the incoming video.
Image resolution
The SVGA resolution of the iLV200 projected image is 800x600. The projector is
compatible with screen resolutions up to 1280x1024. If your computer screen
resolution is higher than 1280x1024, reset it to a lower resolution before you
connect the projector.
Note: The iLV200 projector automatically expands 640 x480 images to 800 x
600. You can display these images at their native resolutions by turning
off the Auto Resize feature. For more information, see ″Resize″ on page
1-20.
The XGA resolution of the iLC200 projected image is 1024x768. The projector is
compatible with screen resolutions up to 1280x1024. If your computer screen
resolution is higher than 1280x1024, reset it to a lower resolution before you
connect the projector.
Note: The iLC200 projector automatically expands 640x480 and 800x600 images
to 1024x768. You can display these images at their native resolutions by
turning off the Auto Resize feature. For more information, see ″Resize″
on 1-20.
Compatibility
The projector is compatible with a wide variety of computers and video
devices, including:
© Copyright IBM Corp. 2002 1-1