Filter
Top Products
2-2 MegaRAID 8480 Hardware Installation
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
2.2 Quick Installation
The following steps are for quick MegaRAID 8480 Storage Adapter
installation. These steps are for experienced computer users/installers.
Section 2.3, “Detailed Installation,” contains the steps for all others to
follow.
Step 1. Review all safety information provided with the server; then,
turn off the server and all attached devices and unplug the
server and device power cords.
Step 2. Open the cabinet of the host system by following the
instructions in the host system technical documentation.
Step 3. Check the memory module on the adapter.
Step 4. Install the MegaRAID 8480 Storage Adapter in the server and
connect SAS or SATA II devices to it. Ensure that the cables
you use conform to all specifications.
Step 5. Perform a safety check.
a. Ensure that all cables are properly attached
b. Ensure that the MegaRAID 8480 Storage Adapter is
properly installed
c. Close the cabinet of the host system
Step 6. Turn power on after you complete the safety check.
2.3 Detailed Installation
This section provides detailed instructions for installing a MegaRAID
8480 Storage Adapter.
Step 1. Unpack the Storage Adapter
Unpack and remove the MegaRAID 8480 Storage Adapter.
Inspect it for damage. If it appears damaged, or if any of the
following items are missing, contact your place of purchase.
The MegaRAID 8480 Storage Adapter is shipped with: