IBM MegaRAID 8480 Network Card User Manual


 
Technical Specifications 3-5
Copyright © 2006-2007 by LSI Corporation. All rights reserved.
The MegaRAID 8480 RAID controller and the LSIiTBBU02 are CSA
C22.2 No. 60950-1, UL 60950-1 First Edition listed Accessory, UL file
number E257743.
3.3.1 Storage Adapter Specifications
Tabl e 3.3 lists the specifications for the MegaRAID 8480 RAID controller.
Table 3.3 Storage Adapter Specifications
Specification MegaRAID 8480 RAID Controller
Processor
(PCI Express Host
Controller to PCI
Secondary I/O
Controller)
Intel IOP333 I/O processor @ 500 MHz
Operating Voltage +3.3 V, +12 V
Card Size 8480 RAID Controller: Standard height, half-length PCI
Express adapter card size (4.376" x 6.6")
Array Interface
to Host
PCI Express Rev 1.0a
Type of Drives
Supported
Serial Attached SCSI (SAS) and Serial ATA II (SATA II)
PCI Express Bus
Data Transfer Rate
Up to 2.5 Gbits/s per lane
x8 lane width (with support for downshifting for
motherboards with x1 and x4 connections)
Up to 2 Gbytes/s per direction for SAS x8 cards
(4 Gbytes/s total)
Serial Port 3-pin RS232-compatible connector (for manufacturing
use only)
SAS Controller(s) One LSISAS1068 Single SAS controller
SAS Bus Speed 3 Gbits/s
SAS Ports Two SAS connectors with four SAS ports each
Cache Configuration 8480 RAID controller: Integrated 256 Mbyte Double Data
Rate II 400 MHz SDRAM intelligent transportable battery-
backed DIMM module
Size of Flash ROM
for Firmware
4 Mbytes
Nonvolatile Random
Access Memory
(NVRAM)
32 Kbytes for storing RAID configuration