Filter
Top Products
Commands Quick Reference
67
Console Commands
help-kbd Lists the console functional keys.
banner Displays banner.
clear Clears the screen (no argument is required with this command).
login
Exits Admin Interface; but does not disconnect a Telnet session.
logout Exits Admin Interface; Telnet session will be disconnected.
set-page Sets console page.
set-prompt Changes console prompt.
set-attr-
prompt
Sets the prompt attributes.
set-attr-msg Sets the message attributes.
set-attr-text Sets the text attributes.
set-passwd Changes the console password.
System Commands
sys-stat Shows system status.
get-stst-level
Shows the hardware selftest level.
set-stst-level Changes the hardware selftest level.
warm-reset Restarts the device without resetting the log.
cold-reset Restarts the device the same way as a power cycle.
get-last-err
Retrieves the number of warm resets since the last hardware reset. It also displays
the last Fatal error message and the time since that error happened.
init-nvram
Resets the non-volatile RAM on the SNMP Agent to default values.
get-sw-file Retrieves SNMP agent software file name.
set-sw-file Sets the SNMP Agent Software file name - for download.
get-tftp-mode Retrieves the TFTP download mode.
set-tftp-mode Sets the TFTP download mode.
get-tftp-srvr Retrieves the TFTP server address.
set-tftp-srvr
Sets the TFTP server IP address.
sw-dnld Begins software download from TFTP server.
set-fg-param Sets the Ethernet frame generator parameters.
start-fg Starts the Ethernet frame generator
stop-fg Stops the frame generator.