Filter
Top Products
Commands Quick Reference
68
IP Commands
get-ip Shows current IP address.
set-ip Sets IP address.
get-ip-cfg Shows current IP configuration.
set-ip-cfg Sets IP address, netmask and broadcast.
clear-ip-cfg
Clears IP configuration in NVRAM.
get-gatew Shows default gateway.
set-gatew Defines default gateway.
get-bootp retrieves the state of the BOOTP process
set-bootp enables or disables the BOOTP process activation
Ping Commands
ping ICMP utility.
ping-stop
Stops the ping process.
ARP Commands
get-arp-tbl
Displays the ARP Table.
del-arp-entry Deletes an entry/all entries (*) of the ARP table.
add-arp-entry Adds an entry to the ARP table.
get-arp-stats Gets ARP statistics.
EtherChannel Commands
new-ec Creates a new EtherChannel.
get-ec-tbl Shows EtherChannel Table.
get-ec-entry Show EtherChannel entry.
del-ec Removes an EtherChannel.
SNMP Commands
get-comm Shows current read and /or write community.
set-comm Changes the read or write community.
get-auth Shows the traps authentication mode.
set-auth Sets the trap authentication mode.
get-traps Shows destination stations in the trap list.
add-trap
Adds destination station to trap list.
del-trap Deletes a destination station from trap list.