Filter
Top Products
IWILL ZMAXdp
28 User’s Manual
Installing an AGP card
Accelerated Graphics Port (AGP) slot that supports AGP8X/4X cards. When you buy an AGP card,
make sure that you ask for one with +1.5V specification.
Put the AGP card directly over the proper slot and
press one end of the card into the slot. Firmly
press the other end until it is fully seated in the
slot.
Note the notches on the card golden fingers to ensure that they fit the AGP slot on your
ZMAXdp.
Install only 1.5V AGP cards on this motherboard! 3.3V AGP cards are not supported in
this motherboard.