Filter
Top Products
IWILL ZMAXdp
8 User’s Manual
About this Manual
Audience
This guide provides general information and installation instructions about the IWILL ZMAXdp
series Barebone workstation. This guide is intended for experienced users and integrators with
hardware knowledge of personal computers.
How this guide is organized
This document contains the following parts:
1. Chapter 1: System Introduction
This chapter gives a general description of the IWILL barebone system. It includes
introduction on the front and rear panel features, and the internal features.
2. Chapter 2: System Assembly
This chapter tells how to install components into the barebone system through illustrated
step-by-step instructions.
3. Chapter 3: Positioning the System Unit
This chapter detail steps of setting up your computer, arranging your workspace and installing
other peripherals.
4. Chapter 4: Motherboard Information
This chapter gives information about the P4S8L motherboard that came with the system. This
chapter includes the motherboard layout, jumper settings, and connector locations. It also
includes information on the USB/audio board located on the front panel.
5. Chapter 5: BIOS information
This chapter tells how to change system settings through the BIOS Setup menus. It includes
detailed descriptions of the BIOS parameters.
6. Chapter 6: Drivers and Utilities
This chapter helps you power up your system and install drivers and utilities that came with
the support CD.
7. Chapter 7: Specification
This chapter gives information about ZMAXdp detail hardware specification.