Filter
Top Products
SFF Workstation Installation Guide
User’s Manual 49
Internal Connectors
IDE1, IDE2: IDE Drive Connectors
The two IDE drive connectors are marked IDE1, the primary channel, and IDE2, the secondary
channel. Each connector supports two drives, a Master and a Slave.
Pin 20 on each IDE connector is removed to match the covered hole on the UltraDMA
cable connector. This prevents incorrect orientation when you connect the cables. For
UltraDMA100/66 IDE devices, use an 80-conductor IDE cable.
The red stripe of the ribbon cable must be the same side with the Pin1.