Filter
Top Products
5
1. Introduction
SAGP-845EV is a PSB form factor board to work with a high
performance processor. It is equipped with advanced multi-
mode I/O, and designed for system manufacturers,
integrators, or VARs who want to provide all the
performance, reliability, and quality at a reasonable price.
In addition, SAGP-845EV’s onboard Intel 845G MGCH chip
features built-in AGP4X capability which provides 3D
graphics up to 2048x1536x16-bit-color resolution. The
onboard VGA shares 8MB system DDR-SDRAM.
An advanced high performance super AT I/O chip – ITE
IT8712 is used in the SAGP-845EV board. Both on-chip
UARTs are compatible with the NS16C550. The parallel port
and IDE interface are compatible with IBM PC/AT
architecture.
SAGP-845EV’s built-in ICH4 has 10/100 Fast Ethernet LAN
capability. It’s fully integrated 10BASE-T/100BASE-TX LAN
solution with high performance networking functions and low
power features.
SAGP-845EV uses the advanced Intel 845G Chipsets that is
a 100% software-compatible chipset with PCI 2.2 standard.
This PIAGP CPU card must be installed on IEI
PCIAGP/PXAGP series backplanes. If onboard ISA interface
is required, please be sure to install PISA-KIT01 daughter
board on the specific socket on the backplane before ISA
cards are installed to make sure the system works properly.