Filter
Top Products
Connecting the cables
This section describes how to connect the following cables:
1. Power adapter cord
2. Digital signal cable
3. Power cord
Connecting the power adapter cord
1. Connect the power adapter cord to the DC-IN connector at the rear of the
monitor. Make sure that it clicks firmly into the connector.
DC-IN connector
Top
v
iew
Bottom view
Videoconnector
Note: The video connectors A and B on the monitor are Safety Extra Low
Voltage (SELV) circuits.
2. Route the cables through the cable clamp and the cable hook.
Cable hook
Cable clamp
6 AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL