Filter
Top Products
Knowing the operating status of your monitor
You can know the status of your monitor by the color of the power light.
Power light
The color of the power light changes from green to amber when your monitor
receives a time-out video signal from the computer and enters Standby mode to
save power. A time-out video signal is sent from your computer to the monitor when
the former detects inactivity on the keyboard or mouse for a set duration of time.
You can change the time-out duration for your monitor from the computer. Refer to
the manual shipped with your computer to change the time-out duration value.
Color Mode Power
Consumption
Description
Green Normal
Operation
150 W
(Maximum)
The monitor is operating normally and is receiving
the synchronous video signal from the computer.
Amber Standby
Mode
Less than 15
W
Either:
v the monitor is in Standby mode to save power, or
v the video cable is disconnected.
If the monitor is in Standby mode, it is not receiving
any video signals from the computer.
If the video cable is disconnected, refer to
Chapter 4, “Troubleshooting” on page 19.
Amber
(fast
blinking
at
0.25-sec.
intervals)
—— An error such as ″fan not working″ has occurred.
Refer to Chapter 4, “Troubleshooting” on page 19.
Amber
(slow
blinking
at 1-sec.
intervals)
—— The monitor does not support the incoming video
signal.
16 AQU5611D BK/AQU5611DT BK 9.2 Million Pixels Color TFT LCD Monitor USER MANUAL