Filter
Top Products
16
Component video connection
If your video device has component connectors, use the Component to S-
video adapter. For HD and progressive sources use the Component to VESA
adapter along with a Component cable (not included).
Plug the Component cable into the video device. Plug the other end of the
Component cable into one of the two adapter’s and plug the adapter into
the projector’s S-video (for S-video) or Computer in (for VESA) connector.
Component connection offers the highest quality video output.
VGA connection
If your video device has a 15-pin VGA output, plug one end of the com-
puter cable to the VGA connector on your video source. This connector may
be labeled “To Monitor” on the video source. Plug the other end of the cable
into the Computer In connector on the projector.
For audio, connect the white and red AV cable connectors into your video
device. Plug the blue connector into the projector’s Audio In connector.
Connect the power cord to the Power connector on the side of the projector
and to your electrical outlet.
NOTE: Always use the power cord that shipped with the projector.
connect component cables via Component
to S-video adapter
or
via Component to VESA adapter
Component
to VESA
Component
to S-video
connect VGA cable and
AV cable
connect power cable
sp4800_ug_en.fm Page 16 Monday, September 29, 2003 2:08 PM