Filter
Top Products
6
Connecting a computer source
Required computer connections
Connect one end of the computer cable (see page 11 for connecting video
devices) to the dark blue Computer In connector on the projector. Connect
the other end to the video port on your computer. If you are using a desktop
computer, you will need to disconnect the monitor cable from the com-
puter’s video port first.
Connect the black power cord to the Power connector on the side of the pro-
jector and to your electrical outlet.
NOTE: Always use the power cord that shipped with the projector.
Optional computer connections
To have sound with your presentation, connect an audio cable (not included
with this projector) to your computer and to the Audio In connector on the
projector. Visit www.infocus.com/accessories to view optional cables..
If you are using a desktop computer and want to see the image on your
computer screen as well as on the projection screen, connect the computer’s
monitor cable to the Monitor Out connector on the projector.
You can use your computer’s mouse with an optional remote control to
operate the navigation buttons during a presentation. The remote included
with this projector does not allow this function. Connect the projector to the
computer via a USB cable (not included). USB drivers must be installed to
use the USB feature. For more information, see page 10. Visit
www.infocus.com/accessories to view optional remote controls.
connect computer cable
connect power cable
connect audio cable
connect monitor cable
connect USB cable
sp4800_ug_en.fm Page 6 Monday, September 29, 2003 2:08 PM