Filter
Top Products
31
Settings menu
Audio: allows adjustments to Volume of the internal speaker and allows a
chime to play when starting the projector. Volume adjustments can also be
made from the projector’s keypad.
Sources: Power-up Source determines which source the projector checks
first for active video during power-up. When the Autosource feature is On,
the projector automatically finds the active source, checking the selected
Power-up Source first. The source options are Computer for a computer,
progressive DVD, or HDTV source, and S-video and Composite for video
sources. When this feature is Off, the projector defaults to the source
selected in Power-up Source. To display another source, you must manually
select one by pressing the Source button on the remote or keypad.
System>Rear: reverses the image so you can project from behind a translu-
cent screen. Ceiling: turns the image upside down for ceiling-mounted pro-
jection. Low Power: toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter. Auto Power: When Auto Power is checked, the projector automati
-
cally starts up after the projector is powered on. This allows control of ceil-
ing mounted projectors with a wall power switch. Display Messages:
displays status messages (such as “Searching”) in the lower-left corner of
the screen. PC Screen Saver Off: prevents your computer from going into
Screen Save mode. The projector must be connected to the PC via a USB
cable for this feature to work. Power Save: automatically turns the lamp off
after no signals are detected for 20 minutes. After 10 additional minutes
with no signal, the projector powers down. If an active signal is received
before the projector powers down, the image will be displayed. After an
additional 10 minutes with no signal, the projector powers down and can be
toggled off. If an active signal is received before the projector powers down,
the image will be displayed. When Power Save is enabled, Screen Save is
disabled. Screen Save automatically blanks the screen with a black color
after no signals are detected for a preset number of minutes. The image
returns when an active source is detected or a remote or keypad button is
pressed.
Settings menu
Audio
Power-up
Source
Sources
System menu
Screen Save