Filter
Top Products
31
Lamp Low Power: Toggles between on and off. Turn it on to lower the light
output of the lamp. This also lowers the fan speed, making the projector
quieter.
Current Lamp: (IN5532/IN5534 only) Controls which lamp(s) is in use.
Lamp Auto Switch: (IN5532/IN5534 only) Controls when the projector
switches between lamps. Choices include: upon failure, at power-up, or
after a set number of hours.
Power Sounds: Controls whether the projector makes a sound when
powered on and off.
Internal Speakers: Allows the user to turn on and off the internal speakers.
Audio Inputs: Assign an audio input to a specific video/computer source
input. (Default settings are as follows: Audio 1 is used with VGA 1; Audio 2
is used with VGA 2 and RGBHV/YPbPr; Audio 3 is used with Component;
Audio 4 is used with S-video; Audio 5 is used with composite.)
Press up or down to highlight the source you want to change, then press
select or the left and right arrow keys to change that source’s audio input.
Press menu when done changing audio inputs.
Auto Source: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this
feature is Off, the projector defaults to the source selected in Power-up
Source. To display another source, you must manually select one by
pressing the Source button on the remote or keypad.
Power-up Source: Determines which source the projector checks first for
active video during power-up.
Fast Color Refresh: Controls color wheel speed.
Closed Captions: Controls closed caption display while audio is not muted. If
this setting is not off, and audio is not muted, and the source is NTSC and
contains captions on the selected channel, then the projector must display
caption text overlaid on the image.
Ceiling Mount: Turns the image upside down for ceiling-mounted projection.
Rear Project: Reverses the image so you can project from behind a
translucent screen.
Auto Keystone: Automatically adjusts vertical keystoning.
Prevent PC Screen Saver: Prevents your computer from going into Screen
Save mode. The projector must be connected to the PC via a USB cable for
this feature to work.
Search Screen: Allows you to display one of the following options instead of
the default screen at startup, and when no source is detected. Options
include the factory logo screen, a custom Snapshot, or a blue, black or white
screen.
Take Snapshot...: Captures the current image and allows it to be used as the
search screen image.
Disable Snapshot: Allows the user to disable the snapshot capability.
Show Messages: Displays status messages (such as “Searching”) in the lower-
left corner of the screen.
Menu Offset: Allows you to change the position of the On Screen Display
items.
Menu Transparency: Allows you to change how much of the projected image
behind the menu you can see. As the value increases, more of the image
behind the menu is visible.
Magnify Controls: Allows you to change the function of the arrow buttons
when the menu is not shown. By default, the arrow buttons allow you to
advance slides while in PowerPoint’s SlideShow mode. To make the arrow
buttons also adjust magnify settings, choose Magnify Controls to turn
magnify controls on. Now when the menu is not shown, you can press the
Select button to switch between the magnification settings (Magnify Level,
Magnify Horizontal Position and Magnify Vertical Position), then press
Select again to turn off magnify controls and use the arrow buttons to
advance slides.
Lens Adjust Enable: When turned on, lens shift, zoom, focus, digital keystone,
auto keystone and pincushion adjustments can be made. When the product
has been mounted, installers can turn this feature off to prevent changes to
lens shift, zoom, focus, keystone and pincushion settings.
Keypad Enable: Enables or disables keypad.