Filter
Top Products
C H A P T E R 2 Gigabit Ethernet Modules
13
privileged mode. Refer to the Intel® NetStructure™ 6000 User Guide
for instructions on entering privileged mode.
You can configure any port as enabled (active and allowing data to
pass) or disabled (inactive with no data transmission or reception).
All ports are enabled by default.
To disable a port, type disable port port_number.
6000 Switch>#>disable port 8
The table below describes the maximum cable length for the module.
Light Emitting Diodes (LEDs) provide status information for the
module. There are three LEDs per port (link, transmit and receive)
and one global LED (status).
The table describes the LEDs for the module.
Port
Type Cable Type Length
1000SX 62.5 micron multimode 2 to 275 meters 6.5 to 902.2 feet
60 micron multimode 2 to 550 meters 6.5 to 1,804.5 feet
1000LX single-mode fiber
between a 6000 switch
1000Base-LX port and a
1000Base-LX port on a
non-6000 switch port.
5 kilometers 16,404.2 feet
single-mode fiber
between two 6000 switch
1000Base-LX ports.
10 kilometers 32,808.4 feet
LED Color Definition
Status (Board) Solid Yellow Power up diagnostics
are running.
Flashing Yellow Power up diagnostics
failed.
Flashing Green Normal Operation -
the board is operating
normally.