Filter
Top Products
Intel Desktop Board D810EMO/MO810E Technical Product Specification
52
2.10.2 I/O Shield
The back panel I/O shield for the board must meet specific dimension and material requirements.
Systems based on this board need the back panel I/O shield to pass certification testing. Figure 9
shows the critical dimensions of the I/O shield. Dimensions are given in inches [millimeters]. For
dimensions given to two decimal places, the tolerance is ±0.02 inches (±5.08 millimeters). The
figure indicates the position of each cutout. Additional design considerations for I/O shields
relative to chassis requirements are described in the ATX specification. See Section 1.3 for
information about the ATX specification.
0.46[11.80]
0.66[16.86]
5.82
[147.90]
5.32
[135.15]
1.64
[41.89]
0.80
[20.57]
0.00
4.37
[111.14]
0.47[12.03]
0.00
0.68
[17.32]
OM08930
0.33 Dia(2)
[8.50]
Figure 9. I/O Shield Dimensions