Filter
Top Products
Intel Desktop Boards D815EEA2, D815EPEA2, D815EFV, and D815EPFV Product Guide
10
Table 2. Feature Summary (continued)
Characteristic Specification
Video
• The D815EEA2 and D815EFV boards include:
Intel 82815E integrated graphics support
AGP universal connector supporting 1x, 2x, or 4x AGP cards or a Graphics
Performance Accelerator (GPA)
Rear panel VGA connector
• The D815EPEA2 and D815EPFV boards include an AGP universal connector
supporting 1x, 2x, or 4x AGP cards
Peripheral
Interfaces
• Two serial ports: one back panel and one internal connector
• Four USB ports: four back panel and two optional front panel
• One parallel port
• Two IDE interfaces with Ultra DMA (33 MB/sec) and ATA-66/100 support
• One diskette drive interface
• PS/2
†
keyboard and mouse ports
Expansion
Capabilities
• For D815EEA2 and D815EPEA2 boards:
Five PCI add-in card connector (SMBus routed to PCI bus connector 2,
S5 wake from PCI bus connector 2)
One AGP universal connector
• For D815EFV and D815EPFV boards:
Three PCI add-in card connectors (SMBus routed to PCI bus connector 2,
S5 wake from PCI bus connector 2)
One AGP universal connector
BIOS
• Intel/AMI BIOS
• 4 Mbit Firmware Hub (FWH)
• Support for Advanced Power Management (APM), Advanced Configuration and Power
Interface (ACPI), Plug and Play, and SMBIOS
Instantly
Available
Technology
• ACPI S3 Suspend to RAM (STR) sleep state
• Support for PCI Local Bus Specification Revision 2.2
• Wake on PS/2 keyboard and USB ports
Power
Management
Support for both ACPI Rev. 2.0 and APM Rev. 1.2
PC Design
Compliance
PC 99 and PC 99A
Hardware
Monitor
Heceta 4 supporting:
• Remote diode temperature sense
• Voltage sense to detect out of range values
• Fan tachometer
SCSI LED
Connector
Allows add-in SCSI controllers to use the same LED as the onboard I/O controller