Filter
Top Products
BIOS SETUP
AFW-3000 User’s Manual 27
Standard CMOS Setup
“Standard CMOS Setup” choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the Server Motherboard is already installed
in a working system, you will not need to select this option. You will
need to run the Standard CMOS option, however, if you change your
system hardware configurations, the onboard battery fails, or the
configuration stored in the CMOS memory was lost or damaged.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Tue, Jan 1 2002 Item Help
Time (hh:mm:ss) 00 : 00 : 00 Menu Level
IDE Primary Master None Change the day, month,
IDE Primary Slave None Year and century
IDE Secondary Master None
IDE Secondary Slave None
Drive A 1.44M, 3.5 in.
Drive B None
Video EGA/VGA
Halt On All Errors
Base Memory 640K
Extended Memory 129024K
Total Memory 130048K
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It will
display the relevant information to help you. The memory display at the
lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following
describes each item of this menu.
Date
The date format is:
Day : Sun to Sat
Month : 1 to 12
Date : 1 to 31
Year : 1994 to 2079
To set the date, highlight the “Date” field and use the PageUp/
PageDown or +/- keys to set the current time.