Filter
Top Products
User’s Manual
96 ECB-862/862L User’s Manual
Press A Key To Reboot
This will be displayed at the bottom screen when an error occurs that requires you to
reboot. Press any key and the system will reboot.
Press F1 To Disable NMI, F2 To Reboot
When BIOS detects a Non-maskable Interrupt condition during boot, this will allow you to
disable the NMI and continue to boot, or you can reboot the system with the NMI enabled.
RAM Parity Error – Checking For Segment...
Indicates a parity error in Random Access Memory.
Should Be Empty But EISA Board Found
Please Run EISA Configuration Utility
A valid board ID was found in a slot that was configured as having no board ID.
NOTE; When this error appears, the system will boot in ISA mode, which allows you to run the EISA
Configuration Utility.
Should Have EISA Board But Not Found
Please Run EISA Configuration Utility
The board installed is not responding to the ID request, or no board ID has been found in
the indicated slot.
NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA
Configuration Utility.
Slot Not Empty
Indicates that a slot designated as empty by the EISA Configuration Utility actually
contains a board.
NOTE: When this error appears, the system will boot in ISA mode, which allows you to run the EISA
Configuration Utility.
System Halted, (CTRL-ALT-DEL) To Reboot...
Indicates the present boot attempt has been aborted and the system must be rebooted.
Press and hold down the CTRL and ALT keys and press DEL.