Filter
Top Products
ECB-862/862L
ECB-862/862L User’s Manual 45
4.5.2.1 Standard CMOS Selection
This table shows the selections that you can make on the Standard CMOS Selection.
Item Options Description
Date Month DD YYYY
Set the system date. Note that the ‘Day’
automatically changes when you set the
date
Time HH : MM : SS Set the system time
IDE Primary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu of
detailed options
IDE Primary Slave
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu of
detailed options
IDE Secondary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu of
detailed options
IDE Secondary Master
Options are in its sub menu
(described in Table 3)
Press <Enter> to enter the sub menu of
detailed options
Drive A
Drive B
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Select the type of floppy disk drive
installed in your system
Video
EGA/VGA
CGA 40
CGA 80
MONO
Select the default video device
Halt On
All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key
Select the situation in which you want the
BIOS to stop the POST process and
notify you
Base Memory N/A
Displays the amount of conventional
memory detected during boot up
Extended Memory N/A
Displays the amount of extended
memory detected during boot up
Total Memory N/A
Displays the total memory available in
the system
Table 2 The Standard CMOS Features Selections