Filter
Top Products
ECB-862/862L
ECB-862/862L User’s Manual 49
4.5.3.9 Typematic Rate Setting
Key strokes repeat at a rate determined by the keyboard controller. When enabled, the
typematic rate and typematic delay can be selected.
The choice: Enabled/Disabled.
4.5.3.10 Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you hold the key down.
The choice: 6, 8, 10, 12, 15, 20, 24, 30.
4.5.3.11 Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to repeat the keystroke.
The choice: 250, 500, 750, and 1000.
4.5.3.12 Security Option
Select whether the password is required every time the system boots or only when you
enter setup.
S
ystem
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
S
etup
The system will boot, but access to Setup will be denied if the correct
password is not entered at the prompt.
Note: To disable security, select PASSWORD SETTING at Main Menu and then you will
be asked to enter password. Do not type anything and just press <Enter>, it will
disable security. Once the security is disabled, the system will boot and you can
enter Setup freely.
4.5.3.13 APIC Mode
The BIOS supports versions 1.4 of the Intel multiprocessor specification. When enabled,
The MPS Version 1.4 Control for OS can be activated.
The choice: Enabled/Disabled.
4.5.3.14 OS Select for DRAM > 64
Select the operating system that is running with greater than 64MB of RAM on the system.
The choice: Non-OS2, OS2.