Filter
Top Products
User’s Manual
ESM-2740/2743 User’s Manual
61
3.5.4.2.2 USB Keyboard / Mouse Support
This item allows you to set the system’s USB keyboard/mouse to Enabled/Disabled.
The choice: Enabled, Disabled
3.5.4.2.3 AC97 Audio
This item allows you to decide to enable/disable the 815 chipset family to support AC97
Audio.
The choice: Auto, Disabled
3.5.4.2.4 Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
The choice: PCI Slot, AGP/Onboard.
3.5.4.3 Super IO Device
3.5.4.3.1 Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the system
board and you wish to use it. If you install and-in FDC or the system has no floppy drive,
select Disabled in this field.
The Choice: Enabled, Disabled.
3.5.4.3.2 Onboard Serial Port 1 / 2
Select an address and corresponding interrupt for the first and second serial ports.
The Choice: Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disable.
3.5.4.3.3 UART Mode Select
Select UART 2 mode as standard serial port or IR port.
The Choice: IrDA, ASKIR, Normal..