![](http://pdfasset.owneriq.net/3/b8/3b86c108-212d-4372-89c7-b1e93903e6c6/3b86c108-212d-4372-89c7-b1e93903e6c6-bg2e.png)
46
2
Hardware Installation
2
1
ON
2.6.3 S/PDIF Connector
"
The S/PDIF connector (J5) is used to connect external S/PDIF
ports. The S/PDIF ports may be mounted on a card-edge bracket.
Install the card-edge bracket to the system chassis then connect
the audio cable connector to J5. Make sure pin 1 of the audio
cable connector is aligned with pin 1 of J5.
15
+5V
Key
SPDIF out
GND
SPDIF in