Filter
Top Products
- 35 -
P3 Series User's Manual
4.5.9 PC Health Status
・
FAN Mode Setting
This item allows you to set the CPU fan states. When set to [Full on mode], the following
items become selectable.
・
All Voltages, Fans Speed and Thermal Monitoring
These unchangeable items list the current status of the CPU and environment
temperatures, fan speeds, and system power voltage.
・
Shutdown Temperature
You can set the processor shutdown temperature here. If the processor temperature
exceeds the settings value, system will force to shutdown to protect the processor not
overheat.
・
Sensor Show On Post
Show the system status when post.
Phoenix - AwardBIOS CMOS Setup Utility
PC Health Status
*** FAN Control Setting ***
FAN Mode Setting
x Slop PWM 1
x Temperature Limit of OFF
x Temperature Limit of Start
[Full On mode ]
0.500 PWM
0
20
Item Help
Menu Level
►
x Temperature Limit of Full 80
x Fan Start PWM
x Fan PWM Control
70
100
*** System Health ***
Sensor Show On Post
Shutdown Temperature
CPU VCORE:
+5 V:
[Enabled]
[Enabled]
1.32 V
4.97 V
+3.3 V : 3.34 V
VDIMM:
5VSB :
VBAT :
CPU Temp:
SYS Temp:
CPU FAN:
SYS FAN1:
SYS FAN2:
1.82 V
4.99 V
3.26 V
31
。
C
23
。
C
1000 RPM
800 RPM
0 RPM
↑↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults