Filter
Top Products
Introduction
5
1.3.5 Power-On/Off (Remote)
The board has a single 20-pins connector for ATX power supplies. For
ATX power supplies that support the Remote On/Off feature, this should be
connected to the systems front panel for system Power On/Off button. The
systems power On/Off button should be a momentary button that is normally
open.
The board has been designed with “Soft Off" functions. You can turn off
the system from one of two sources: The first is the front panel Power
On/Off the button, and the other is the "Soft Off" function (coming from the
M/B onboard circuit controller) that can be controlled by the operating
system such as Windows
®
2000 / XP / NT or Linux
®
.
1.3.6 IP-4MTS6B / IP-4GMS6F Series Overview
Function / Model IP-4MTS6B IP-4GMS6F
¡ Processor Socket Type Onboard 600MHz
(Without L2 Cache)
¡ Chipset Intel
®
855GME Intel
®
852GM
¡ LVDS function
¡ VGA function
¡ Gigabit Ethernet function 2 2
¡ Audio Line-out interface 1 1
¡ 40-pins EIDE interface 2 2
¡ Floppy interface 1 1
¡ Parallel port 1 1
¡ PCI slot 1 1
¡ Serial ports 2 2
¡ USB 2.0 ports (two for optional USB cable) 6 6
¡ Fan connector 2 2
¡ External KB/MS connector 1 1
¡ LAN Extend to front panel LED pin-header 2 2