Intel IP-4MTS6B Computer Hardware User Manual


 
Award BIOS Setup
48
Memory Hole At 15M-16M:
You can reserve this area of system memory for ISA adapter ROM. When
this area is reserved, it cannot be cached. The user information of
peripherals that need to use this area of system memory usually discusses
their memory requirements.
The choice: Enabled, Disabled.
Delayed Transaction:
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select “Enabled” to support compliance with PCI
specification version 2.2.
The choice: Enabled, Disabled.
Delay Prior To Thermal:
Select this item allows the delay prior to thermal time.
The choice: 4Min, 8Min, 16Min and 32Min.
AGP Aperture Size (MB):
This field determines the effective size of the Graphic Aperture used for a
particular GMCH configuration. It can be updated by the GMCH-specific
BIOS configuration sequence before the PCI standard bus enumeration
sequence takes place. If it is not updated then a default value will select an
aperture of maximum size.
The choice: 4, 8, 16, 32, 64, 128 and 256.
**On-Chip VGA Setting**
On-Chip VGA:
This item allows you to control the on-chip VGA.
The choice: Enabled, Disabled.
On-Chip Frame Buffer Size:
This item allows you to control the on-chip frame buffer size.
The choice: 1M, 4M, 8M, 16M and 32M.
Boot Display:
This item allows you to select the boot display device.
The choice: CRT, LFP and CRT+LFP.
Panel Scaling:
This item allows you to select the panel scale.
The choice: Auto, On, Off.