Filter
Top Products
Intel
®
IXDP465 Development Platform—Quick Start Guide
May 2005 Intel
®
IXDP465 Development Platform AN
22 Order Number: 305825, Revision: 002
5. Verify the board booted properly by checking the LCD display
• for RedBoot bootloader:
line 1 = RedBoot
line 2 = 0001
• for VxWorks bootloader: see Figure 7.
11.0 Operating the Platform
The software release notes are intended to guide the user through software installation and setup of
the host computer, and can be found at the following Web site:
http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm
Note: You must register and login to download Intel software.
In the “Software Available” section of the above Web site, first click Register/Login, then select the
latest current software release; for example, “Intel
®
IXP400 Software v2.0”. Then click the link for
the release notes; for example, “2.0 Release Notes”.
Developers should continue by following the instructions in the software release notes.
Refer to the Intel
®
IXDP465 Development Platform User’s Guide for detailed instructions on using
the IXDP465 development platform, including how to update the IXDP465 development
platform’s flash memory.
12.0 Technical Support
If any of the contents are missing or if you have any questions, contact your local Intel
representative.
Figure 7. LCD Display for Wind River* VxWorks* Bootloader