Filter
Top Products
Quick Start Guide—Intel
®
IXDP465 Development Platform
AN Intel
®
IXDP465 Development Platform May 2005
Order Number: 305825, Revision: 002 5
1.0 Purpose
This document, the Intel
®
IXDP465 Development Platform Quick Start Guide, contains
instructions for unpacking, inspecting, setting up, and starting the Intel
®
IXDP465 Development
Platform.
Before the IXDP465 development platform is powered up for the first time, it is very important to
first become familiar with the platform. Therefore, Section 5.0 through Section 8.0 provide the
required information for powering up the platform for first time use. These sections provide the
following information:
• Photo of the IXDP465 development platform setup for Quick Start operation, showing the
location of factory-installed mezzanine modules and location of key interfaces to assist with
connection of console, Ethernet, and power cables.
• Factory default settings of all switches and jumpers, allowing the user to ensure they were not
accidentally changed during transport, or repositioned by a previous platform user.
• Location and definitions of the LCD display and all the platform LEDs, so that they can be
visually monitored for proper power-up and booting.
Instructions for preparing and starting the IXDP465 development platform begin in Section 9.0.
Note: It is highly recommended that a printout of this entire Quick Start Guide is obtained prior to
preparing and powering up the platform for the first time. All tables in this Quick Start Guide
include checkboxes so that items in the printout can be checked off to insure that all platform
switches, jumpers, and LEDs operate in their default state, which will ensure a successful first-time
bootup of the platform.
Use the Zoom feature in Adobe* Reader* to optimize viewing of the figure details contained in this
document, for example, the switch and jumper locations on the IXDP465 development platform.
Note: If any deviations from the factory default settings of this Quick Start Guide are planned, or for
more detailed information about this platform, including design definition of all boards, mezzanine
cards, platform components, optional modules, optional switch and jumper settings, and overall
development capabilities, please see the Intel
®
IXDP465 Development Platform User’s Guide.
2.0 Applicable Documents and Revisions
The documents referenced below may be obtained online unless noted otherwise.
Table 1. Reference Documents (Sheet 1 of 2)
Title
Document
Number
Location
Intel
®
IXDP465 Development Platform User’s Guide 306462 Documentation Web Page
†
Intel
®
IXDP465 Development Platform Specification Update 306509 Intel Representative
Intel
®
IXDP465 Development Platform Documentation Kit N/A Documentation Web Page
†
† This document is available at:
http://www.intel.com/design/network/products/npfamily/docs/ixp4xx.htm
†† This document is available at: http://www.intel.com/design/network/products/npfamily/ixp425swr1.htm