Filter
Top Products
Disassembly
Removing the System Memory (RAM) 2 - 9
2.Disassembly
Removing the System Memory (RAM)
The computer has two memory sockets for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) DDR III
(DDR3) supporting 1066/1333 MHz. The main memory can be expanded up to 6GB. The SO-DIMM modules supported
are 1024MB and 2048MB DDR Modules. The total memory size is automatically detected by the POST routine once
you turn on your computer.
Memory Upgrade Process
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Remove screws & from the bottom of the computer.
3. Turn the computer over, open the Lid/LCD, and carefully (a cable is connected to the underside of the LED
cover module) lift up the LED cover module
4. Remove screws - from the keyboard.
Figure 5
RAM Module
Removal
a. Remove the screws
from the bottom of
the computer.
b. Turn the computer
over, open the lid/
LCD and lift the LED
cover module.
c. Remove the screws
from the keyboard.
Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high tem-
peratures. Allow the
area time to cool before
removing these parts.
•7 Screws
1 2
3
4
5 9
c.
2
1
b.
3
4
5 6 7 98
a.