Filter
Top Products
BIOS SETUP
Standard CMOS Setup
“Standard CMOS Setup” choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the board is already installed in a working
system, you will not need to select this option. You will need to run
the Standard CMOS option, however, if you change your system
hardware configurations, the onboard battery fails, or the
configuration stored in the CMOS memory was lost or damaged.
Phoenix – Award WorkstationBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy) Wed, Jul 26 2006 Item Help
Time (hh:mm:ss) 11 : 55 : 00 Menu Level >
IDE Channel 0 Master None
IDE Channel 0 Slave None
IDE Channel 1 Master None
Change the day, month,
Year and century
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
None
None
None
Drive A None
Video EGA/VGA
Halt On All , But Keyboard
Base Memory 640K
Extended Memory 980992K
Total Memory 982016K
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It
will display the relevant information to help you. The memory display
at the lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following
describes each item of this menu.
Date
The date format is:
Day : Sun to Sat
Month : 1 to 12
Date : 1 to 31
Year : 1999 to 2099
26 MB879 User’s Manual