Filter
Top Products
BIOS SETUP
Power Management Setup
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
ACPI Suspend
S1(POS) ITEM HELP
C2 Disable/Enable
Disabled
Power Management Option
HDD Power Down
Video Off Option
User Define
Disabled
Suspend -> Off
Video Off Method
V/H SYNC+Blank
Modem Use IRQ
3
Soft-Off by PWRBTN
Instant-Off
PowerOn by PCI Card
PowerFail Status
Wake Up On LAN/Ring
Thermal Duty Cycle
Disabled
Always Off
Disabled
Disabled
Menu Level >
RTC Alarm Resume
Disabled
Date (of Month) 0
Resume Time (hh:mm:ss) 0 : 0 : 0
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
C2 Disable/Enable
The default setting is Disabled.
Power Management Option
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard
disk drive will be powered down while all other devices remain active.
Video Off Option
When Always On, the video is off in suspend mode. The default
setting is Suspend -> Off.
40 MB879 User’s Manual