Filter
Top Products
Using the Setup Program
42
Power Menu
This menu is for setting power management features.
Table 15. Power Menu
Feature Options Description
Power Management • Disabled
• Enabled (default)
Enables or disables the BIOS power
management feature.
Inactivity Timer • Off (default)
• 1 Minute
• 5 Minutes
• 10 Minutes
• 20 Minutes
• 30 Minutes
• 60 Minutes
• 120 Minutes
Specifies the amount of time before the
computer enters standby mode.
Hard Drive • Disabled
• Enabled (default)
Enables power management for hard disks
during standby and suspend modes.
VESA Video Power Down • Disabled
• Standby (default)
• Suspend
• Sleep
Specifies power management for video during
standby and suspend modes.
Boot Menu
This menu is for setting the boot features and the boot sequence.
Table 16. Boot Menu
Feature Options Description
Quick Boot Mode • Disabled
• Enabled (default)
Enables the computer to boot without running certain
POST tests.
Scan User Flash
Area
• Disabled (default)
• Enabled
Enables the BIOS to scan the flash memory for user
binary files that are executed at boot time.
After Power Failure • Power On (default)
• Stay Off
• Last State
Specifies the mode of operation if an AC/Power loss
occurs.
Power On
restores power to the computer.
Stay Off
keeps the power off until the power button is
pressed.
Last State
restores the previous power state before power
loss occurred.
On Modem Ring • Stay Off
• Power On (default)
Specifies how the computer responds to an incoming call
on an installed modem when the power is off.
On LAN • Stay Off
• Power On (default)
Specifies how the computer responds to a LAN wakeup
event when the power is off.
On PME • Stay Off (default)
• Power On
Specifies how the computer responds to a PME wakeup
event when the power is off.
continued
☛