Filter
Top Products
Upgrading the BIOS
48
10. On the jumper block (J8A1), move the jumper back to pins 1-2 as shown below to set normal
mode for Setup.
1
3
J8A1
OM07072
11. Leave the upgrade diskette in drive A, replace the computer cover, and connect the computer’s
power cord.
12. Turn on the computer and continue with the BIOS upgrade (see page 46).
Changing the BIOS Language
You can use the BIOS upgrade utility to change the language the BIOS uses for messages and the
Setup program. Use a bootable diskette containing the Intel Flash Memory Update Utility and
language files (see “Upgrading the BIOS” on page 46).
1. Boot the computer with the bootable diskette in drive A. The BIOS upgrade utility screen
appears.
2. Select
Update Flash Memory From a File
.
3. Select
Update Language Set
. Press
<Enter>
.
4. Select drive A and use the arrow keys to select the correct
.lng
file. Press
<Enter>
.
5. When the utility asks for confirmation that you want to flash the new language into memory,
select
Continue with Programming
. Press
<Enter>
.
6. When the utility displays the message
upgrade is complete
, remove the diskette. Press
<Enter>
.
7. The computer will reboot and the changes will take effect.