Filter
Top Products
CHAPTER 3
AMI
®
BIOS USERS GUIDE
Standby Time Out
This option specifies the length of a period of system inactivity
while in Full power on state. When this length of time expires, the computer
enters Standby power state. The settings are Disabled, 1 min, 2 min, 3 min, 4
min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or
15 min. The Optimal and Fail-Safe default settings are Disabled.
Suspend Time Out
This option specifies the length of a period of system inactivity
while in Standby state. When this length of time expires, the computer
enters Suspend power state. The settings are Disabled, 1 min, 2 min, 3 min, 4
min, 5 min, 6 min, 7 min, 8 min, 9 min, 10 min, 11 min, 12 min, 13 min, 14 min or
15 min. The Optimal and Fail-Safe default settings are Disabled.
Throttle Slow Clock Ratio
This option specifies the speed at which the system clock runs in
power saving states. The settings are expressed as a ratio between the
normal CPU clock speed and the CPU clock speed when the computer is in
the power-conserving state.
Modem Use IO Port
This indicates which IO port will be used by the Modem(if there is a
Modem).
Modem Use IRQ
This indicates which IRQ no. will be used by the Modem(if there is
a Modem).
3-18