Filter
Top Products
Chapter 3 Award BIOS Setup
35
3.4.5 Boot Up NumLock Status
The default is “On”.
On Keypad boots up to number keys.
Off Keypad boots up to arrow keys.
3.4.6 Boot Up System Speed
High Sets the speed to high.
Low Sets the speed to low.
3.4.7 IDE HDD Block Mode
Enabled Enable IDE HDD Block Mode.
BIOS will detect the block size of the HDD and send a
block command automatically.
Disabled Disable IDE HDD Block Mode.
3.4.8 Gate A20 Option
Normal The A20 signal is controlled by the keyboard
controller or chipset hardware.
Fast (Default) The A20 signal is controlled by Port 92 or the
chipset specific method.
3.4.9 Typematic Rate Setting
The typematic rate determines the characters per second accepted by
the computer. The Typematic Rate setting enables or disables the
typematic rate.
3.4.10 Typematic Rate (Chars/Sec)
BIOS accepts the following input values (characters/second) for
typematic rate: 6, 8, 10, 12, 15, 20, 24, 30.