Filter
Top Products
41 Chapter 4
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS.
The password can be at most 8 characters long.
Remember - to enable this feature, you must first select either Setup or
System in the BIOS FEATURES SETUP.
4.2.10 Save & exit setup
If you select this option and press <Enter>, the values entered in the setup
utilities will be recorded in the chipset's CMOS memory. The micropro-
cessor will check this every time you turn your system on and compare
this to what it finds as it checks the system. This record is required for the
system to operate.
Confirm Password
Figure 4.9: Save and Exit Setup Screen