Filter
Top Products
PCM-9387 User’s Manual 34
4.5.3 USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. The choices: Enabled, Disabled.
4.5.4 USB Keyboard/Mouse Support
Select Enabled if user plan to use an USB keyboard. The choice:
Enabled, Disable.
4.5.5 AC97 Audio
Select Disable if you do not want to use AC-97 audio. Option is Auto,
Disable.
4.5.6 Init Display First
This item allows you to choose which one to activate first, PCI Slot or on-
chip VGA. The choices: PCI Slot, Onboard.
4.5.7 Onboard LAN Control
Option is Enable and Disable. Select Disable if user does not want to use
onboard LAN controller1
4.5.8 IDE HDD Block Mode
You can enable the Primary IDE channel and/or the Secondary IDE chan-
nel. Any channel not enabled is disabled. This field is for systems with
only SCSI drives.
4.5.9 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk drives to
the onboard floppy disk drive connector instead of a separate controller
card. If you want to use a different controller card to connect the floppy
disk drives, set this field to Disabled.
4.5.10 Onboard Serial Port
For settings reference the Appendix for the serial resource allocation,
and Disabled for the on-board serial connector
4.5.11 UART Mode Select
This item allows you to select UART mode. The choices: IrDA, ASKIR,
Normal.
4.5.12 RxD, TxD Active
This item allows you to determine the active of RxD, TxD. The Choices:
“Hi, Hi,” “Lo, Lo,” “Lo, Hi,” “Hi, Lo.”
4.5.13 IR Transmission Delay
This item allows you to enable/disable IR transmission delay. The
choices: Enabled, Disabled.