Intel PMB-531LF Computer Hardware User Manual


 
Chapter 3 Software Configuration
Page:3-4
PMB-531LF USER
S MANUAL
3-3. FLASH BIOS UPDATE
3-3-1. System BIOS Update:
Users of PMB-531LF can use the program “Awdflash.exe” contained in
the Utility Disk for system BIOS and VGA BIOS update.
3-3-2. To update VGA BIOS for LCD Flat Panel Display:
As PMB-531LF user, you have to update the VGA BIOS for your
specific LCD flat panel you are going to use. For doing this, you need
two files. One is the “Awdflash.exe” file and the other is the VGA BIOS
for ATI Rage Mobility M6 file for LCD panel display. Both file must be
provided by the vendor or manufacturer. When you get these two files
ready, follow the following steps for updating your VGA BIOS:
1. Install “Awdflash.exe” from Utility Disk to Drive C.
2. Insert the VGA BIOS file you have obtained from the vendor.
Type the path to Awdflash.exe and execute the VGA BIOS update
with file B531xxxx.bin
3. C:\UTIL\AWDFLASH>AWDFLASH B531xxxx.bin
4. The screen will display as the table fount on the next page:
FLASH MEMORY WRITER v7.XX
(C) Award Software 2001 All Rights Reserved
Flash Type – SST 49LF004A /3.3V
File Name to Program: B531xxxx.bin
Checksum: XXXXX
Error Message: Do You Want To Save BIOS (Y/N)