Filter
Top Products
Intel® Integrated RAID Module SROMBSASMR (AXXROMBSASMR) Technical Product Specification Introduction
1. Introduction
This document provides a detailed description of the Intel
®
Integrated RAID Module
SROMBSASMR (also known as Intel
®
Integrated RAID Controller SROMBSASMR) and the
software that supports it.
1.1 Product Overview
The Intel
®
Integrated RAID Module SROMBSASMR is designed to fit the following Intel
®
Server
Boards and Systems:
Intel
®
Server Board S5520UR
Intel
®
Server System SR1600UR
Intel
®
Server System SR1625UR
Intel
®
Server System SR2600UR
Intel
®
Server System SR2625UR
Intel
®
Server Board S5520HC/S5500HCV
Intel
®
Workstation Board S5520SC
Intel
®
Server Board S5500WB
Note: Additional Intel
®
Server Boards and Systems may be supported. For the most up-to-date
list, see the Compatibility section under the link for this Intel
®
RAID Module at
http://support.intel.com/support/motherboards/server/.
The Intel
®
Integrated RAID Module SROMBSASMR supports both enterprise-class serial ATA
(SATA) and serial-attached SCSI (SAS) disk drives, which allows solutions to be customized for
performance, reliability, system expansion flexibility, and hard drive capacity. It provides such
flexibility and helps lower the total cost of ownership with a standardized server and storage
infrastructure.
This RAID module is designed with four internal SAS/SATA ports through 4 individual
connectors and uses a custom board-to-board 50-pin connector to provide x4 PCI Express*
support.
1.2 Operating System Support
The following operating systems are fully validated and supported at product launch. The latest
service pack/update available at start of the test run is tested:
Microsoft Windows Server 2003* 32-bit
Microsoft Windows Server 2003* 64-bit Edition
Microsoft Windows Server 2008* 32-bit
Microsoft Windows Server 2008* 64-bit Edition
Microsoft Windows Vista* 32-bit
Microsoft Windows Vista* 64-bit Edition
Revision 1.2
Intel order number E59029-003
1