Filter
Top Products
User Guide XB1 COM Express Module
©EKF -23- ekf.com
EMC Recommendations
In order to comply with the CE regulations for EMC, it is mandatory to observe the following rules:
C The chassis or rack including other boards in use must comply entirely with CE
C Close all board slots not in use with a blind front panel
C Front panels must be fastened by built-in screws
C Cover any unused front panel mounted connector with a shielding cap
C External communications cable assemblies must be shielded (shield connected only at one end
of the cable)
C Use ferrite beads for cabling wherever appropriate
C External I/O connectors may require additional isolating parts
Reccomended Accessories
Blind CPCI Front
Panels
EKF Elektronik Widths currently available
(1HP=5.08mm):
with handle 4HP/8HP
without handle
2HP/4HP/8HP/10HP/12HP
Ferrit Bead Filters ARP Datacom,
63115 Dietzenbach
Ordering No.
102 820 (cable diameter 6.5mm)
102 821 (cable diameter 10.0mm)
102 822 (cable diameter 13.0mm)
Metal Shielding
Caps
Conec-Polytronic,
59557 Lippstadt
Ordering No.
CDFA 09 165 X 13129 X (DB9)
CDSFA 15 165 X 12979 X (DB15)
CDSFA 25 165 X 12989 X (DB25)