Filter
Top Products
English
17
3.4. Integrated Peripherals
ø This menu allows you to control the various ports of the computer such as IDE, SATA,
USB, IEEE1394, COM port, LPT port, AC97 audio, etc.
n IDE1 Conductor Cable
Allows user to select the type of IDE1 conductor cable. Prior to selecting the setting,
please make sure that the IDE device and cables support the desired setting.
Options: Auto, ATA66/100/133, ATA33 (default:Auto)
n IDE2 Conductor Cable
Allows user to select the type of IDE2 conductor cable. Prior to selecting the setting,
please make sure that the IDE device and cables support the desired setting.
Options: Auto, ATA66/100/133, ATA33 (default:Auto)
n On-Chip Primary PCI IDE
Allows the user to enable or disable the first onboard IDE channel. (default:Enabled)
n On-Chip Secondary PCI IDE
Allows the user to enable or disable the second onboard IDE channel. (default:Enabled)
n AC97 Audio
Allows the user to use the onboard AC97 audio. (default:Enabled)
n Onboard LAN device
Allows the user to enable or disable the onboard LAN. (default:Enabled)
n USB Controller
Allows the user to enable or disable the onboard USB controller. (default: Enabled)
n USB Legacy Support
Allows the user to use a USB keyboard or mouse. (default:Disabled)
n Onboard Serial Port 1
Allows the user to enable or disable the first onboard serial port.
Options: Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
IDE1 Conductor Cable [Auto]
IDE2 Conductor Cable [Auto]
On-Chip Primary PCI IDE [Enabled]
On-Chip Secondary PCI IDE [Enabled]
AC97 Audio [Enabled]
Onboard LAN device [Enabled]
USB Controller [Enabled]
USB Legacy Support [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ECP]
ECP Mode Use DMA [3]
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}