Filter
Top Products
22
English
3.8. MB Intelligent Tweaker(M.I.T.)
ø This allows user to configure CPU frequency and voltage settings.
ø This section is very dangerous for inexperienced users, and therefore it is not
recommended that these settings be altered. An incorrect setting can result in system
instability, corrupt data, or permanent hardware damage.
n Configure DRAM Timing
Allows user to set up DRAM Timing. (default:Auto)
Options: Auto (sets DRAM Timing by DRAM SPD data automatically)
Manual (sets DRAM Timing manually)
n Cas Latency Setting
Options: Auto (automatically sets Cas Latency) (default:Auto)
2T, 2.5T, 3T (selects Cas Latency as user require)
n DRAM RAS Active Time
Options: Auto (automatically sets DRAM RAS Active Time) (default:Auto)
4T, 5T, 6T, 7T, 8T, 9T (selects DRAM RAS Active Time as user require)
n DRAM RAS Precharge Time
Options: Auto (automatically sets DRAM RAS Precharge Time) (default:Auto)
3T, 2T, 4T, 5T (selects DRAM RAS Precharge Time as user require)
n DRAM RAS to CAS Delay
Options: Auto (automatically sets DRAM RAS to CAS Delay) (default:Auto)
3T, 2T, 4T, 5T (selects DRAM RAS to CAS Delay as user require)
n CPU Clock Ratio
Allows user to set the CPU Clock Ratio.
If the CPU used locks this feature, then it will not be displayed or will not function. (based
on CPU type)
n Linear Frequency Control
Allows user to use Linear Frequency Control. (default:Disabled)
n CPU Clock (MHz)
If you wish to use this feature, please set the "Linear Frequency Control" to Enabled. If this
feature is disabled, the currently CPU Clock will be displayed.
The CPU Clock can be input between 100MHz to 355MHz.
If you have a FSB400 Pentium 4 CPU, please set the "CPU Clock" to 100MHz.
If you have a FSB533 Pentium 4 CPU, please set the "CPU Clock" to 133MHz.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
MB Intelligent Tweaker(M.I.T.)
Configure DRAM Timing [Auto]
x Cas Latency Setting 2.5T
x DRAM RAS Active Time 7T
x DRAM RAS Precharge Time 3T
x DRAM RAS to CAS Delay 3T
CPU Clock Ratio [21X]
Linear Frequency Control [Disabled]
x CPU Clock (MHz) 133
x DRAM Clock (MHz) AUTO
AGP/PCI Clock Control [AUTO]
x AGP Clock (MHz) 66
x PCI Clock (MHz) 33
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level}
[AUTO]
Configure DRAM
Timing automatically
[Normal]
Configure DRAM
Timing by manual
Warning: Wrong DRAM
Timing may make
system can't boot.
Clear CMOS to overcome
wrong Timing issue