Filter
Top Products
9. From the Basic: Site Survey screen, copy the MAC address (BSSID) of AP1
and add it to the Remote AP MAC Address list on the Operation Mode screen.
Click “Update” and “Reboot.” The Operation Mode screen should now
appear as below.
10. From the Status menu, go to the Association Status screen. Once you see the
association of AP1 with AP2 and AP2 with AP1, you may unplug AP2 from
the network and move it to the permanent location.
NOTE: In Repeater mode, both APs must have the same SSID and be on the
same channel. AP2 (Wireless Repeater) must have the MAC address of AP1
(Access Point mode) in the Remote MAC Address list in order to associate with
AP1. NOTE: Also, the default gateways of AP1 and AP2 should be the IP address
of the router on your network.
Wireless Bridge Mode
1. Connect AP1 to your network.
2. Go to the Basic: Operation Mode screen and select “Wireless Bridge” as the
operation mode.
3. From the Basic: Site Survey screen, copy the MAC address (BSSID) of the AP
you’re bridging with and add it to the Remote AP MAC Address list on the
Operation Mode screen.
11
CONFIGURATION