Filter
Top Products
4. Click “Update” and “Reboot.” The Operation Mode screen should appear as
below.
5. Repeat Steps 1–4 for the second AP you are bridging to.
6. From the Status menu on AP1 (bridge) and AP2 (bridge), go to the Association
Status screen to verify that the two are associating. If so, AP1 (bridge) and
AP2 (bridge) are ready to be placed in permanent locations. NOTE: In Bridge
mode, both APs must be on the same channel. The MAC address of AP1
(bridge) must be in the Remote MAC Address list of AP2 (bridge) and the
12
CONFIGURATION