Filter
Top Products
SPECIFICATIONS
Standards
• IEEE 802.11b (11 Mbps Wireless LAN)
• IEEE 802.11g (54 Mbps Wireless LAN)
• IEEE 802.11g+ (108 Mbps Wireless LAN)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• SNMPv1/v2c (Simple Network Management Protocol)
General
• LAN ports: one RJ-45 10/100 Mbps data/PoE port
• FTP pass-through
• VPN pass-through support: IPSec, PPTP, L2TP
Management Options
• Conguration methods: HTTP, SNMP and Telnet
• General conguration options:
- Frequency: channel frequency step size = 5 MHz
- Bandwidth
- Automatically associate to WAP with identical ESSID
- Seamless roaming
- IP address (DHCP and static IP)
- Firmware upgrade on the y
- Two-level password security (administrator and super user level)
Wireless
• Wireless frequency range: 2.400 – 2.4835 GHz
• Modulation technologies:
- 802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK
- 802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK,
16QAM, 64QAM
• Channels:
- USA & Canada: 12 channels
- Europe: 13 channels
- Japan: 14 channels
• Data rates:
- IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps)
- IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps,
9 Mbps, 6 Mbps)
• Output power: max. 20 dBm
• Receiver sensitivity: -73 dBm (54 Mbps); -87 dBm (11 Mbps)
• Maximum coverage distance: 5 km (3 mi.) in Bridge Point to Point mode
• Wireless security:
- WEP encryption (64/128/152 bit)
- WPA (TKIP and AES)
- 802.1x support in AP mode
- Client access control through media access control (MAC) lter
- Disable/enable ESSID broadcast
• Wireless operation modes: Access Point, Repeater, Bridging and AP Client
• Maximum wireless user connections: 50
• Antenna:
- Integrated 9 dBi panel antenna, beam width 45° vertical, 45° horizontal
- N-type connector for external high-gain antenna
21
SPECIFICATIONS