Filter
Top Products
RAD-Series 7.1 Getting Started Guide
Interlink Networks, Inc. Page 10
Changing the Server Manager Port
If you can’t use the default port of 8080 for Server Manager:
1 In a text editor, open the file server.xml (in /opt/tomcat/conf by default).
2 Locate the following lines:
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />
3 Change “8080” to the port you wish to use.
4 Save and close server.xml.
5 Stop and restart Server Manager.
Stopping Server Manager
To stop the Server Manager program:
1 Change directory to /Server Manager directory/bin.
2 Run shutdown.sh.
Starting Remote Control
On each machine where you’ve installed Remote Control:
1 Change directory to /Remote Control directory.
2 Run
rmistart.sh.
Accessing Server Manager
Once the Server Manager program is started, to access the graphical user interface:
1 Open your browser and enter the URL http://IP-address:Port/aaa where:
• IP-address is the IP for the machine that hosts the Server Manager program.
•
Port is the port number assigned to Server Manager. Default is 8080.
2 Enter the Server Manager administrator user name and password you choose at installation.