Filter
Top Products
RAD-Series 7.1 Getting Started Guide
Interlink Networks, Inc. Page 19
Basic Server Administration
Basic administration for AAA Servers can be done using the Server Manager Administration
page.
You can run any of these commands on several servers at once. Just select all the servers to be
included from the Status frame.
1 Access the Server Manager.
2 Choose Administration from the Navigation frame.
3 In the Status frame, select the server(s) by checking the box.
Be sure to clear the box for any selected servers where you don’t want to run the command.
4 In the Workspace frame, click the command to perform:
• Start—starts server operation after it’s been stopped. You’ll see a green GO icon next to
the server name in the Status frame to indicate it’s online.
• Stop—stops server operation. You’ll see a red STOP icon next to the server name in the
Status frame to indicate it’s offline.
• Restart—let’s you apply new configurations without having to first stop the server. First
save the new configurations to push them to the server.
• Status—checks whether the server is responding. If it is, you’ll see the message
“Server-name(Port-number) is responding.”
• Time—shows the date/time on remote servers.