Intermec PB41 All in One Printer User Manual


 
12 PB41 Printer Quick Start Guide
Bluetooth Self-Test Print-out Explanation (continued)
DescriptionTest Item
Available Fonts LOC shows whether a font is Resident (R) or
Downloaded (D); CPI shows characters per inch;
DESCRIPTION describes the font; Version and
DATE of font loads; NAMES give the “Easy Print”
name, the Line Printer name, and the hexadecimal
equivalent of that name.
Available Graphics LOC shows whether a font is Resident (R) or
Downloaded (D); DESCRIPTION describes the
graphic; Version and DATA of graphic program
load;NAMES give the “Easy Print” name, the Line
Printer name, and the hexadecimal e qui vale nt of that
name.
Available Bar Codes All supported barcodes are displayed. “DE -
SCRIPTION” describes the graphic. “NAMES”
give the “Easy Print” name, the Line Printer name,
and the hexadecimal equivalent of that name.
Paper Loading
Out of Paper
The PB41 Printer sounds two quick beeps when it runs out of
paper. If the printer is out of paper, the printer suspends opera-
tion until paper is present and the lever is down. The printer
continues to c ommunicate with the mobile computer as long as
it does not “time out.” Once the printer restarts, it finishes the
rest of the print job from where it left off.
Removing Paper Core from your PB41 Printer
1 Unsnap the latch and lift up the cover.
2 Wrap your index finger around the empty paper core and pull
up. The paper rod will snap out.
3 Remove the empty paper c ore and discard.
Paper Loading
Standard Paper
If you are using standard paper, you can load the paper auto-
matically or manually. Experiment to find out which method is
best for you.